What configurations are available? (E.g.: Backless / side less / side-access)

Q: What configurations are available? (E.g.: Backless / side less / side-access)

All enclosures are available in backless, side-less and side access variations. A ‘ backless’ enclosure is more appropriate when there is less than 2 inches from the wall and the equipment (e.g.: a pipe, a filter, pump etc.). The design of the backless enclosure will allow you to lift the lid without hitting the wall / fence. They have additional ‘brackets’ at the back which get affixed (screwed / bolted) to the wall / fence. Please note, backless enclosures therefore add 50mm to the depth. A side-less enclosure is useful/required when you do not have 25mm of space down one side of the enclosure to fit the side panel. An example of that is when there are pipes or other equipment too close to a side wall which prevents you from sliding the side panel (of the enclosure). The design uses the same ‘wall brackets ‘which are used for ‘backless’ enclosures. A side-less enclosure adds 50mm to the width and comes with a door stay in lieu of a gas strut Side access is an enclosure that also has a removable door on one of the sides (in lieu of the normal side panel). This is particularly useful when there is confined access to the enclosure (e.g.: it is located at the side of the house on a narrow thoroughfare). Having a side access panel allows you access the enclosure from the side (rather than the front). Please also note, gas struts are not available on the side where side-access or sideless is requested.

All enclosures are available in backless, side-less and side access variations.

A ‘backless’ enclosure is more appropriate when there is less than 2 inches from the wall and the equipment (e.g.: a pipe, a filter, pump etc.). The design of the backless enclosure will allow you to lift the lid without hitting the wall / fence. They have additional ‘brackets’ at the back which get affixed (screwed / bolted) to the wall / fence.

Please note, backless enclosures therefore add 50mm to the depth.

A side-less enclosure is useful/required when you do not have 25mm of space down one side of the enclosure to fit the side panel. An example of that is when there are pipes or other equipment too close to a side wall which prevents you from sliding the side panel (of the enclosure). The design uses the same ‘wall brackets ‘which are used for ‘backless’ enclosures. A side-less enclosure adds 50mm to the width and comes with a door stay in lieu of a gas strut

Side access is an enclosure that also has a removable door on one of the sides (in lieu of the normal side panel). This is particularly useful when there is confined access to the enclosure (e.g.: it is located at the side of the house on a narrow thoroughfare). Having a side access panel allows you access the enclosure from the side (rather than the front).

Please also note, gas struts are not available on the side where side-access or sideless is requested.